Other product
Notes
artificial-wood is a man-made wood produced by resin and wood power, compare with natural wood it has some different features .please pay attention to the following items in the course of designing and construction.
The attention when being designed is clicked:
To the flexible item (seam, fixed hole)
The artificial-wood may expand a little when it is heated and bibulous;
Products while assembling, used in ground, please leave the intersection of 5MM and interval, please stay 3MM interval while using for the wall;
It is the same too when other structure things are connected to the building;
When being used in the skylight, roof beam columned. to use, should notice its material elasticity on the structure. (hole of the screw keep empty a bit etc.).
Seaming
Anchoring spurs
Picture instraction
Mould wood operation method:
When being used in the floor, wall, want in the fossil fragment, after the five metals is fixed, could install, don't install in the cement on the ground directly.
Top
you would better let the part which out of the top smaller ,and must be einforced at the top.
to the use at a long distance
Used in using the occasion at a long distance such as the skylight, long-term use will have crooked phenomenon that take place, so specialized metal assists materials to cooperate. insert it could be used.
For the occasion at a long distance, there must be more than 3 fixing points.
Attention on constructing
Custody
About keeping
Custody
Because of the possibility to deform, don't fix vertically while keeping the products, keep flat on the ground;
Prevent being drenched by the rainwater, hide well by protecting materials;
Make sure there is no hard object such as hammers etc. to drop and strike, all these may cause the damage of the products;
When put on the hard ground, should notice the port don't strike phenomena.
About processing
Preparation method:
When artificial wood under the process, cut, turn on hole, rub, it scrapes to be can by originally processing the tool that the timber spend;
The saw-dust after scraping contains resin compositions, so regard it as not to burn garbage disposal;
If need to carry on cut at section, will cause and deform. Please try hard to avoid.
About constructing
Hit the screw
Open the hole and hit the screw while hitting the screw in advance;
Should use the stainless steel screw;
While using the electronic screwdriver, presume well, throw the screw into again with faint strength;
The high strung that the screw is twisted while dallying, so long as enlarge size to tighten directly;
When striking, weigh in the hand and do well with the wood or rubber.
Preset the hole
hit the screw
Method to imbed post (use the fender)
Artificial wood can not use as pillar,but if you want to embedded it in cement, Its micro- inflation may cause the cement to split open.
In order to prevent the occurrence of this kind of phenomenon, is burying some to wrap up with the padded coaming in advance, don't contact the cement directly.
Fender
The damage of cement care
About producing water hole
To having materials of hole, are opening the hole by sealing the board and sealing it, because will swell after heating, some water will stay in material, so can open water hole by the diameter of ¦Õ 5-8MM.
Install a board
Install a board
The envelope board in the aperture, can slightly enlarge, after installs, repairs it to pour the raised angle with the plane.
While installing a board, it is by binding pharmaceuticals specially, please certainly, fixed it by screw .
Bind pharmaceuticals
When you assembling the artificial wood , please stick and connect by special binding pharmaceuticals.
The decorate of coating
Please use the specialized coating when decorated the artificial wood.
© 2008 Shanghai Longsun Industrial & Trading Company
»¦ICP±¸08010828ºÅ
